Tim,
Thanks for the quick reply. I have to say that the performance I saw
on 6M has me really wanting to use this as my IF rig for EVERYTHING!
The ability to spot adjacent activity in the contest was a huge
benefit. I'll be eagerly awaiting this fix.
Thanks,
Eric kr0ver
At 06:04 AM 1/23/2011, Tim Ellison wrote:
Sounds like a bug. I'll submit the behavior listed below as a bug report.
-Tim
-----Original Message-----
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Eric Watkins
Sent: Sunday, January 23, 2011 12:13 AM
To: Tom; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex 1500 Transverter Operation
I have observed this same operation. As a result I had to just use
the PA output on the 1500 for 6M during the contest. If I switched
to xvtr/com the power out went to zero. Reboot/restart of SDR was
the only cure for me as well. Also using 2.0.16 on 64bit win7.
SDR worked just fine on 6M as long as I didn't switch off to the
XVTR port. I really need this functionality to work if I'm going to
use the SDR to drive the xverter stack.
GL
kr0ver/r
At 07:47 PM 1/22/2011, Tom wrote:
>I am sitting here running the VHF contest on top of a mountain in Alabama.
>
>I have been running the Flex-1500 for most of the evening driving an
>Elecraft 2M transverter. The transverter is being driven through the
>XVTX/COM for both transmit and receive. I have the key line coming out
>of the Flex going to the transverter and the transverter keys the
>amplifier.
>
>I switched over to listening on 6M for a little bit to see how it
>compares with my other radio and when I went back to 2M I tried to call
>a station. Everything keyed, the PowerSDR software showed modulation,
>but nothing was coming out of the transverter.
>
>I tried stopping and starting the software ... didn't work. Shutdown
>the software and the radio, brought it back up and everything is
>working fine now (I did not reboot the computer). Not sure where the
>output was going to but it wasn't going into the transverter.
>
>OS - WinXP SP3, AMD Athlon dual processor 3800, 3G Ram, PowerSDR
>2.0.16. At the time, the other software running was N3FJP logging
>program. Not using any CAT functionality or VAC SW.
>
>
>Tom
>WB8COX
>
>_______________________________________________
>FlexRadio Systems Mailing List
>FlexRadio@flex-radio.biz
>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>Knowledge Base: http://kc.flexradio.com/ Homepage:
>http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
