Brian, See below: -----Original Message----- From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd Sent: Wednesday, March 02, 2011 09:41 To: Bill Diaz Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] RX2 / HFRIO board
On Wed, Mar 2, 2011 at 7:21 AM, Bill Diaz <william.d...@comcast.net> wrote: I wrote an application to simultaneously control/monitor PowerSDR and the TS480. Since 2.0.19RC 1 came out, it can now switch the 1500 antenna to the XVTR port automatically when the application detects the TS480 transmitting and back to the PA port when transmission ceases. Can't you have your application key the TS480 and let the application sequence PTT? That way the application could switch the antenna on the 1500 and then key the TX480. This would require having a PTT button in the application which the user would access with the mouse or keyboard. Also would have to inhibit TS480 transmit ability to ensure the user did not key the radio with the Mic or key etc. User could not use the TS480 hand Mic until the application allowed it. Semi-breakin CW operation would not be possible under this scenario unless the key was interfaced to the PC and this would, IMO, not be practical. The .application was designed to allow the user to transmit with the TS480 at 100 watts and to receive with the Flex 1500. QSY's, can be performed either via PowerSDR or the TS480 tuning knob. Interconnection only requires a single serial cable and VSPMgr or similar. All transmit functions expected to be performed with the TS480. Pretty basic. It seems there is a need for a box to manage PTT for several devices. Not really familiar with flexwire, but the manual indicates it has both a PTT in port and PTT out port. Seems like the PTT in port could be used to switch the 1500 antenna connection when external PTT is asserted. Latency could still be an issue though, since I don't know if the Flex 1500 antenna switching capability is handled in hardware or software. In any case this would eliminate the need for an external box to manage PTT but would require a hardwired PTT connection between the external radio and the flexwire port. The user could then use the mic and key or keyer connections of the TS480 as originally intended. Will have to look into this, thanks for making me rethink the keying issues. Bill KC9XG -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.931.492.6776 (USA) (+1.931.4.WB6RQN) _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/