On Thu, Mar 10, 2011 at 1:48 AM, Nick Pugh K5QXJ <quadp...@bellsouth.net>wrote:
> Hi all > > I am new to flex. I am trying to get my 5000 working with WSPR via VAC. I > have the tx working . I see waterfall display on the rx but can not decode > it. I have set the rx from +10 to -10 with no joy. Suggestions?? > I'm assuming that when you say you see waterfall display you mean you see the horizontal lines characteristic of WSPR signals? If so, then in my experience, the most likely thing preventing decodes is receive audio that's set too high. Try backing down on the VAC receive level. If not, then do you have the 5000 set to the right frequency? Split mode turned off? (Don't laugh--I once called CQ on Olivia for almost an hour with no responses until I realized I was still in split after working a RTTY DX pileup.) 73, Jerry _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
