> I'm also about to interface a homebrew amp (AN762 with an
> external switched
> filter box-- switching still to be finalized) with my flex1500.
>
> I gather from the links above that I can control the filter box
> (and antenna
> switching) via the paralell port and DDUtils which I already have
> installed.
> I had been wondering how to use it for HB amplifier switching.


Hello Brian,

Since DDUTIL uses only four of the eight available data lines of the
parallel port interface to control the amplifier band switching relays, so
you can tell DDUTIL to "talk" to the other four data lines and connect them
to a second BCD-10 interface and let it control something else.

> Two remaining questions.
>
> 1 I'm using flex 1500 with (currently) amplifier switching from a slave
> relay from the flexwire port ptt. Is there any need to alter
> this, does it
> affect so2r ampkey setup?  This is also probably relavent to the OP.

I think it would work the same.  After all, with the F5K, you take the amp
key signal for the amplifier from the jack on the back of the F5K, which
would be virtually the same thing as the Flexwire port.

> 2 Is there any way to get the PowerSDR tune button to send a signal to one
> of my auto ATUs (LDG) to tune, and then to accept a signal back
> from the atu
> once it has found a match. I suspect it can be achieved with a macro in
> DDUtils.

Usually the amp key line is routed through the ATU which decides when to
tune.  Before it does so, it breaks the amp key line and routes the driver
power to the ATU, which then tunes and when tuning is complete, reconnects
the amp key line. That requires that you manually key the radio, wait for
the tuner to cycle, then unkey the radio.  AFAIK, there's no way for PSDR to
"see" the tuner.

73,

Ralph  W5JGV - WD2XSH/7




_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to