On Wed, Jun 1, 2011 at 11:56 PM, Ian Wade G3NRW <[email protected]> wrote:

> Just in time for the 30m Multi Mode weekend -- 4/5 June 2011.
>
> A few weeks ago Don Hobson, KB9UMT, founder of the 30m Digital Group,
> published the updated "unofficial 30m bandplan" on the 30MDG reflector. I
> responded, saying that the listing was a little misleading, because some
> frequencies were dial frequencies, others were emitted frequencies, and it
> wasn't clear which was which.
>
> Don challenged me to do better. At first I tried to improve the listing
> format, to draw the distinction between dial and emitted frequencies, but
> quickly realized this was not an easy task! I finally capitulated and
> decided on a graphical format instead:
>
> http://homepage.ntlworld.com/wadei/30m_band_utilization.htm


Ah, thank you for providing me with a soapbox for a pet peeve of mine. :-)

Your chart is quite good. Thank you. Regardless, I would suggest losing the
"dial frequencies" altogether. The problem is, dial-frequency is a holdover
from days gone by when we had hardware terminal units (TUs) for RTTY. Dial
frequency is something that needs to be calculated and only serves to
confuse people if provided. They think that the set the dial on their radio
to the published "dial frequency" and they will be on-frequency. Not so. I
think we need to emphasize that dial frequency must be *calculated* based on
subcarrier frequency and desired emission frequency.

(I would love it if fldigi, DM780, and other digital modes had a great big
center-frequency readout with a much smaller VFO/dial-frequency readout to
drive this point home.)

One's "dial frequency" depends on what one is using as a low-IF/subcarrier
and that varies with radio, configuration, digital mode program, etc. If we
use the fldigi/PowerSDR combo as an example, (almost) everything is using an
IF subcarrier of 1500 Hz so the dial frequency will (almost) always be
1500Hz below the emission center frequency ... unless one has moved the
cursor in the waterfall of fldigi and then it is different. Regardless, the
center frequency of the emission is what one needs to record.


I have called it a "Band Utilization" chart. It is exactly that. It is not a
> "bandplan", nor even an "unofficial bandplan". Rather, it is an attempt to
> graphically portray the many modes that are actually in use on 30m today. On
> the chart there is a clear distinction between dial frequencies and emitted
> frequencies, helping you to accurately set the correct frequency and to
> identify signals as they appear on the waterfall.
>
> Prior to posting the chart on my website, I sent a couple of draft versions
> to a number of the world's "movers and shakers" in digital communication and
> HF. Several of them responded with very helpful comments, suggestions and
> corrections, for which I am very grateful.
>
> It's been an "interesting" exercise to fit everything in, but I hope you
> will find the finished chart useful. I think you will be intrigued to see
> just how much is squeezed into the band, especially above 10.140. In
> particular, the graphical approach highlights several overlaps between
> modes, which (to me at least) weren't at all obvious from the tabular
> frequency listing. I was also unaware of just how many Winlink RMS stations
> are active: no less than 48 stations on 32 frequencies, mostly above
> 10.140.


> The chart is a living document. If you see any errors or omissions, or want
> to suggest improvements, please email me at [email protected]


You know what would make a lot of sense? Creating channels based on
bandwidth. (Now I really am killing sacred cows!)

Regardless, good job on the chart. I certainly appreciate it.

-- 
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
[email protected]
+1.767.617.1365 (Dominica)
+1.931.492.6776 (USA)
(+1.931.4.WB6RQN)
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to