On Thu, Jun 2, 2011 at 4:56 PM, Fred Howell <[email protected]> wrote:

> It could be because most hams use radios with actual dials that display the
> "frequency."  Digital modes aren't exclusive to Flex radios.
>

But that "frequency" on the VFO is NOT the frequency of your emission. Try
running a digital mode and then sample your RF in a frequency counter. I can
guarantee that what you see on the counter is NOT the VFO "dial" frequency.
Better still, set your VFO to 10149 kHz, your mode to USB (or DIGU), and the
"audio" frequency to 2kHz for your PSK31 signal. I am sure that the FCC will
be very sympathetic to your cry of, "but the VFO was set to 10149kHz!" The
key is that the ham needs to think about the frequency of the RF coming out
of the radio and being radiated into the aether, not some related but
not-correct value that appears on the VFO frequency read-out.

-- 
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
[email protected]
+1.767.617.1365 (Dominica)
+1.931.492.6776 (USA)
(+1.931.4.WB6RQN)
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to