The TNF is a great feature and appears to be working well in my brief encounter with it last night. As a "casual" operator, I probably will not use it much because the bandpass filters already implemented in PowerSDR are so good. I have yet to experiment with the revised ESC as I really do not have a good second antenna to use with RX2 in the 5K.
Ed, K0KC ________________________________ From: Ed Wilson <ed.wil...@ymail.com> To: Joe <joefish...@gmail.com> Cc: Ross Stenberg <ross.stenb...@charter.net>; "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> Sent: Sunday, August 21, 2011 3:10 PM Subject: Re: [Flexradio] CTCSS Joe, Remote operation using my iPad is on my "to-do" list, but I have other ham radio and personal priorities right now. Thanks for the input. I am sure that Flex will eventually come up with a fix. Ed, K0KC ________________________________ From: Joe <joefish...@gmail.com> To: Ed Wilson <ed.wil...@ymail.com> Cc: Ross Stenberg <ross.stenb...@charter.net>; "flexradio@flex-radio.biz" <flexradio@flex-radio.biz> Sent: Sunday, August 21, 2011 3:07 PM Subject: Re: [Flexradio] CTCSS I have the VU5K and the tones are quite noticeable on 2M FM. Very distracting. Not that I use FM often but when using the Flex remote with my iPad, it's sometimes nice to get into the local repeater when I'm on the road. Joe - KC2TN Sent from my iPad On Aug 21, 2011, at 2:18 PM, Ed Wilson <ed.wil...@ymail.com> wrote: > Ross, > > Thanks for the advice! I did try using the equalizer with frequencies below > 250 Hz attenuated at the maximum of 12 dB with no apparent reduction in the > 123 Hz tone. I also tested headphones and my external speaker and both still > passed the tone at a fairly high level. Perhaps 12 dB is not enough attenuation or perhaps the equalizer does not work when you are in the FM mode. This is not a "show-stopper" as I am rarely on 6 meter FM, but it is a bit distracting. This would probably be an issue with the 2 meter and 70 cm transverters (VU5K) as well, but I cannot test that setup (at the moment, at least...still thinking about adding this capability to the 5000 some day). > > > Ed, K0KC > > > > ________________________________ > From: Ross Stenberg <ross.stenb...@charter.net> > To: flexradio@flex-radio.biz > Sent: Sunday, August 21, 2011 9:14 AM > Subject: Re: [Flexradio] CTCSS > > Most FM ham transceivers don't have the audio and especially speaker systems to reproduce PL tone frequencies. The Motorola speakers used commercially were designed to pass mainly the most intelligible frequencies of the human voice. Flex users typically have more full range speaker-audio systems attached and are capable of reproducing the PL tones. Try enabling the receive equalizer and cut out the low end. > > 73 Ross K9COX > On 8/21/2011 6:31 AM, Ed Wilson wrote: >> Colleagues, >> >> I finally got around to playing around with the FM mode using my Flex-5000 >> on six meters yesterday. I am using PowerSDR 2.1.5 running under Windows >> 7/32 (deviation 5 KHz). I was able to make a contact via a local repeater >> that requires a 123 Hz CTCSS (PL) tone. Although the signal strength was >> not great because of my minimal six meter antenna situation, I noticed the >> the 123 Hz tone was quite evident (when receiving) during the QSO. I did >> some further experimentation with another transceiver that I have here in the shack running on a dummy load. It appears that the only way to filter-out the tone is to engage the NR button. I was wondering if I have missed a check-box or if there is some other way to clean-up FM signals with CTCSS? >> >> A second question relates to the MIC setting. I set the slider for a 0 dB >> reading on the meter and when monitoring the audio in another receiver, >> things sound pretty good, but is there another adjustment technique that >> would be better? >> >> Thanks, >> >> Ed, K0KC >> _______________________________________________ >> > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
