Brett

If the OS is Win7, make sure you are using the legacy 1394 driver instead
of the TI one.

If you are reliably seeing 50% utilization, you are really on the edge of
"too little processing power". Make sure you are not running anything else
when you are playing radio!

73
Neal



On Tue, Nov 22, 2011 at 9:11 PM, Brett Gazdzinski <
brett.gazdzin...@verizon.net> wrote:

> Well, I got my new 3000 today.
> Installation took about 10 minutes, another 1/2 hour to experiment and set
> up all the settings to where I liked.
> Then it was hooking up the microphone and setting the EQ and levels up.
> I tested the atu, and the power output, and everything was fine.
> Cpu is running around 50%, dpc was 250 us.
>
> Then, in the process of transmitting into an amplifier, the computer did a
> temporary hiccup, but sort of restarted psdr.
> After that happened, my maximum power output dropped to 50 watts.
> In AM, setting the drive control to about 10 gives 40 watts out,
> modulation makes the power go down, and the alc is sitting at 0 all the
> time, with no audio.
>
> Shutting everything off and restarting it makes no difference.
>
> How do I do a database reset?
> That was what they always said to do, no?
>
> The radio was working well up to when it was not, some delay through it as
> the computer is on the slow side.
>
> Another thing I noticed is the computer did not see the radio when I
> powered it up a few times after I had turned everything off.
> The speaker icon in the system tray would do something when the radio was
> powered up, then I went into device manager and checked the fire wire card,
> and its there and ok, then the computer sees the radio when its powered on.
> The card is a Roswell with the TI chipset.
>
> Crazy stuff...
> Brett
> N2DTS
>
> ______________________________**_________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
> Archives: 
> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/>
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>



-- 
Neal Campbell
Owner
Abroham Neal LLC
Work:    +1 540 645 5394
Mobile:  +1 540 645 8171
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to