Call Bob Heil. And tell what you are trying to do. Kent KQ4KK
On Dec 29, 2011, at 15:21, "Mark Lunday" <[email protected]> wrote: > Trying to get it to work with my Yamaha CM-500 headset. The Heil PTT switch > works fine in the other half of the AD-1-YM to trigger the transmit, but no > sign of audio output from the CM-500 going into the AD-1-YM..the MIC level > remains at -30 dBM with no sign of movement. > > So I try the Yaesu FT817 hand microphone with its own connector to Flex > 3000, works perfectly. I see MIC levels peaking around -2 dBM. So it's not > the Flex radio or the SDR settings. > > I now try a Plantronics headset with the AD-1-YM connector. Again, no sign > of audio output. > > When I tried the AD-1-YM and the Yamaha CM-500 hooked to my FT817ND QRP > radio, no audio out. It would not trigger the VOX on the FT817ND. As soon > as I hooked up my FT817ND hand microphone to the FT817ND rig, it triggered > the VOX on the FT817ND rig just fine. > > It seems unusual that the AD-1-YM plug would be bad. And I find it unlikely > that the wiring would be incorrect. But these are the only two options: > > (1) A bad connector > (2) Incorrect wiring configuration > > Is anyone else using the AD-1-YM connector with a Flex 3000? This would > help to eliminate Door #2. > > Mark Lunday, WD4ELG > Greensboro, NC FM06be > [email protected] > http://wd4elg.blogspot.com > http://wd4elg.net > > > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
