Hello Tim, i checked ist more detailed and found with stopping the time it is on all bands the same. The PTT noise of the FLEX-1500 is hearable direct after entering a macro. But the needle of the power/SDR meter starts moving exactly after 5.7 seconds on all bands. I do not use ddutil but VCom. The rigcontrol is via Com 7 and PTT i tried seperate COM port with hardware PTT in FLDIGI or without. With harware PTT no delay is set up.Without hardware PTT it is all the same.
Regards Mathias 2012/3/2 Tim Ellison, W4TME <t...@flex-radio.com> > Are you 100% certain that the radio is not being keyed immediately or is > the radio being keyed immediately and there is a delay generating the digi > mode tones and hence the RF? > > PowerSDR does not differentiate between bands when issuing the TX or ZZTX > CAT command to key the radio, so I'd look at Fldigi or any other process > you have in line (are you using DDUtil?) like the virtual com port software > as the possible sources of the problem since it works well on 20m and not > on 40m. > > BTW, I have Fldigi setup using RigCAT to communicate with PowerSDR and to > assert PTT (as opposed to the "bit bang" serial port) and I do not see > these delays. > > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems^(TM) > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: t...@flexradio.com <mailto:t...@flexradio.com> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > > On 3/2/2012 1:40 AM, Mathias Krueger wrote: > >> Hello, >> >> I work for about 4 week in BPSK31 with FLDIGI and my Flex-1500. I found a >> delay difference e.g. between 20m and 40m. In 20m the tx starts quite >> direct if i click a macro or the tx button in FLDIGI. In 40m is a delay of >> about 2s. The PTT switch behavior is the same on 20 and 40. But in 40 there >> is no HF out until the 2 seconds are over... What could be the problem? Any >> solution available? >> >> Thanks in advance. >> Regards >> Mathias >> HB9DOU >> >> >> >> ______________________________**_________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> >> Archives: >> http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/> >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> > ______________________________**_________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> > Archives: > http://www.mail-archive.com/**flexradio%40flex-radio.biz/<http://www.mail-archive.com/flexradio%40flex-radio.biz/> > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
