It happen to me to!! I did the same.
Lu3eec
Francisco
Enviado desde mi BlackBerry de Movistar (http://www.movistar.com.ar) 

-----Original Message-----
From: "Ross Stenberg" <ross.stenb...@charter.net>
Sender: flexradio-boun...@flex-radio.biz
Date: Sun, 8 Jul 2012 09:41:30 
To: Mike - KM0T<scsue...@mtcnet.net>; 
FlexRadio@flex-radio.biz<flexradio@flex-radio.biz>
Subject: Re: [Flexradio] Flex 5000 Power Button

It is a momentary contact switch and the panel clearance hole is very close. 
I had to slightly loosen the front panel and shift it a small amount to 
prevent it from sticking.

-----Original Message----- 
From: Mike - KM0T
Sent: Sunday, July 08, 2012 8:46 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Flex 5000 Power Button

Hi all, just got my flex-5000 going again here and the power switch does not
appear to work.  I noticed it a few months ago that the flex was "on" when
it should not have been.  I have tried to turn off with the blue front
button, but it won't go off.  So I have been pulling the DC plug.  Plugging
the DC back in directly, the flex waits a few seconds and turns "on" without
touching the front panel on switch.  Seems to be working fine other than
that.  Any ideas to "reset" the switch, or is it just a bad switch - failed
in the on position.  Note that the switch does light up with the blue color
when the DC power is applied.



Thanks and 73



Mike - KM0T


_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to