Just had a major problem with the ATU myself on a brand new 5000A. Could only tune a few band, and SWR went up, not down. Turned out that the ATU model was not discovered. The local vendor asked me to do a HW discover on the system, and reset the database, and I can now tune all bands, except 60 and 160 meter, which my antenna does not support (I have a Butternut HFV6), even 12, 17 and 6 m meter without the kits for these frequencies. Most of the time SWR is close to 1. Check the HW information and see if the ATU model is listed, if not rescan HW and reset the database. I suppose that if the model is listed you might try a reset of the database, but I am a novice, so I should be careful giving too many advices.
73 de LA2SL Ulf Sendt fra min iPad Den 27. sep. 2012 kl. 01:22 skrev "Phil A. McBride, VA3KPJ/VA3QR" <va3...@gmail.com>: > Not sure if this is a result of the 2.4.4 upgrade or not, but the ATU will no > longer tune any of my antennas on 10m. Even an antenna that's naturally 1.5:1 > on 28.400 comes up as High SWR. Anyone else seen this before? > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
