On Wed, Mar 13, 2013 at 10:40 PM, Bill Tynan <billandmat...@windstream.net>wrote:
> First let me say that I'm glad to be back on the Flex reflector. I got off > some time ago when I was to away for a few weeks and wanted to reduce my > e-mails. Then, I didn't get around to re-subscibing. Now, I have. > > A month or so ago, I had some kind of computer glitch which, among other > things, reset all of the Flex selections to the factory defaults. I was > useing Power Software 2.3.5 at the time. When I got the radio going again, > I tried to bring up WSJT and DigiPan. Neither worked. With WSJT I get an > Error message below: > I am running WSJT 9.02 and VAC 4.09 and using aFlex 5000. > WSJT and WSPR seem to have a problem with selecting audio channels. Apparently they store the enumeration (channel number) rather than the channel name even though they LIST the channel name. Unfortunately the channel number changes whenever there is a change in the number of audio channels. So if you plug in a USB headphone or microphone, WSJT and WSPR will stop working until you reconfigure the audio channels. I solved the problem by *always* reconfiguring the audio channels whenever I start WSPR. So, even if the configuration of WSJT or WSPR *looks* right, it may not be. So even if the audio channel selection appears correct, reselect the audio channels and see if that fixes the problem. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
