My FLEX-1500 Phase 2 display is displaced outside the center circle to the lower right quadrant and the ADC-L and ADC-R readings show a 4 dB difference. However, the FLEX-3000 Phase 2 display is properly centered with only a 1 dB difference between the ADC-L and ADC-R readings.
The FLEXRadio Knowledge Base article at http://kc.flexradio.com/KnowledgebaseArticle50298.aspx states that the ADC-L and ADC-R levels should be within 1 dB of each other, and that a mixer balance offset may cause the difference to be greater than 1 dB. Do my readings indicate a need for balance calibration of the FLEX-1500 as described at http://kc.flexradio.com/KnowledgebaseArticle50140.aspx ? All screenshots at https://picasaweb.google.com/114032640816757126398/FLEX1500Phase2Display _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
