My Inquiry:
My FLEX-1500 Phase 2 display is displaced outside the center circle to the lower right quadrant and the ADC-L and ADC-R readings show a 4 dB difference. However, the FLEX-3000 Phase 2 display is properly centered with only a 1 dB difference between the ADC-L and ADC-R readings. The FLEXRadio Knowledge Base article at http://kc.flexradio.com/KnowledgebaseArticle50298.aspx states that the ADC-L and ADC-R levels should be within 1 dB of each other, and that a mixer balance offset may cause the difference to be greater than 1 dB. FlexRadio Systems Support response on Apr 13 04:17 pm (CDT): Carol, I had a discussion with the 1500 engineer, and he says due to the way the 1500 internal codec has to work with the USB , that the phase2 is not going to be exactly like the 3000 or 5000 but could not explain the difference. So for now the phase 2 display is not an issue. He suggested that if the Gen/bal passes, it 's operating correctly.. - Dudley --- Dudley Hurry, WA5QPZ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
