I don't see small stuff like I did when I was younger. Is the screw head
straight slot, Phillips, torx, star, or what?
Patrick NJ5G
-----Original Message-----
From: Ross Stenberg
Sent: Monday, January 06, 2014 12:09 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
There is a small plastic screw near the bottom of the meter, make sure that
it is adjusted to zero with the power off.
73 Ross K9COX
-----Original Message-----
From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] S Meter minimum
Hi Matthew and Steve,
KJ4TN???s message about the S3 noise level minimum on the Flex 3K describes my
experience as well. While it varies from band to band a bit, my S Meter
never approaches zero, including when the antennas are disconnected or when
I am connected directly to the dummy load. Noise level runs around 100.
Preamps have a small effect. Sent back to the factory last year for new
preamps plus complete checkout and was given assurances every thing was A-OK
at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a
calibration or adjustment issue?? Not overly concerned but curious just the
same. Thanks!
Bill, KI4B
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
