Ross
I tried to follow your directions, but my S meter disappears when I turn
the power off. :-)
Terry
On 06/01/2014 13:09, Ross Stenberg wrote:
There is a small plastic screw near the bottom of the meter, make sure
that it is adjusted to zero with the power off.
73 Ross K9COX
-----Original Message----- From: Bill Feldkamp
Sent: Monday, January 06, 2014 10:06 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] S Meter minimum
Hi Matthew and Steve,
KJ4TN’s message about the S3 noise level minimum on the Flex 3K
describes my experience as well. While it varies from band to band a
bit, my S Meter never approaches zero, including when the antennas are
disconnected or when I am connected directly to the dummy load. Noise
level runs around 100. Preamps have a small effect. Sent back to the
factory last year for new preamps plus complete checkout and was given
assurances every thing was A-OK at that time. Everything else runs
perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment
issue?? Not overly concerned but curious just the same. Thanks!
Bill, KI4B
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
--
*VE3XTM* EN93un
"May the propagation be with you."
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
