Hoyt A. Fleming writes: > Has anyone had any success interfacing FG with a GPS? I have been > attempting to interface FG with my garmin handheld. However, after reading > the first line of serial data, FG crashes. The first line of data is read > and parsed correctly but FG crashes before the second line of data is read. > > I am using the following configuration: > > --garmin=serial,in,1,COM1,9600 > > I have also attempted to interface FG with another computer that was also > running FG that was configured as follows: > > --garmin=serial,out,1,COM1,9600 > > However, I have the same problem. After the first line of data is read, FG > (on the receiving end) crashes. > > Any ideas?
I haven't tried this in a *long* time (and probably never with a real gps.) Can you compile the garmin.cxx code with the -g option and run this in gdb and see what the back trace says? If we can pin point where it is crashing it probably won't be too hard to figure out why. Curt. -- Curtis Olson IVLab / HumanFIRST Program FlightGear Project Twin Cities [EMAIL PROTECTED] [EMAIL PROTECTED] Minnesota http://www.menet.umn.edu/~curt http://www.flightgear.org _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel