On mar 11 décembre 2007, LeeE wrote: > > > I couldn't resist having a quick look at it:) > > I've attached a config for you to have a look at (tarred & gzip'd) > > I took your revised config and changed: > > approach aoa - now set to 3 deg - 15 deg value seemed much too high > and just wouldn't have worked with the u/c configuration. This is > probably a bit too low but it's difficult to say with such an early > and primitive aircraft - movies clips will help here, if any can be > found. You may get video here:
http://www.videos-aero.com/Bleriot.html and here http://www.pionnair-ge.com/spip1/videos/BleriotXI-Pegoud-JCC-Qtp-103.mov from Jean Salis 80 mo > SNIP > & drag values. The hstab should probably have a camber value too, > considering it's design. > > LeeE Regards -- Gérard http://pagesperso-orange.fr/GRTux/ << Less i work, better i go >> ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel