I'm running on a 6506 with Sup1a/MSFC2 supervisor. I think Jeff's comment would apply only if you did not activate 'mls nde sender', which provides flow export from the PFC.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/comref/m1.htm#wp1232146 The configuration hints from the crannog-software.com page I included in my earlier post seem to have worked well; however, one needs to carefully observe the effect on the switch of going to full flow mask in terms of mls entries (show mls ip count) and cpu utilization when you have a lot of interfaces activated for netflow export. -c On Tue, 25 May 2004 [EMAIL PROTECTED] wrote: > > I'm still trying to find something in Cisco release notes or documentation > > which confirms Jeff's comment about native vs. hybrid mode. > > I'm not quite sure how to read his comment. If he's saying that native > IOS for the 6500/7600 won't export flows from the PFC (NDE), I can flatly > deny that (as in: I have collected PFC based flows for a couple of > *years* from 6509s, and it's very clear from the flows that they are > from the PFC). > > Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
