> -----Original Message-----
> From: van de Werken, Matthew (DEM, PH)
> [mailto:[EMAIL PROTECTED]]
> Sent: 31 May 2001 01:28
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] A request or two
>
[cut]
>
> This is a good idea I think, although I don't tend to use the pin
> properties. Can anyone suggest why I should use the pin properties, other
> than for self-documentation?
The pin type is used by ERC to check for e.g. outputs connected together or
unconnected inputs. I use ERC on every schematic as a final check before
generating the netlist, but with a much more rigorous check matrix than the
default to pick up such things as unintentionally unconnected passive pins
(e.g. on connectors).
Regards
Andy Gulliver
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
