The main change to the ERC matrix that I'd suggest over the default is to set the
"Unconnected" row and column to either warning (yellow) [or error (red)] instead of No
Report (green). This will require you to put a "No ERC" marker on any unconnected
pins, but that seems like a good idea, anyway.
The other change I made was to make the "Unspecified Port" row and column all error
(red), as I don't want to have ANY port unspecified.
Dwight Harm
Trax Softworks, Inc.
-----Original Message-----
From: giuseppe triani [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 10, 2001 11:54 PM
I would like to use a more rigorous ERC check matrix. Did you customized it?
Best Regards,
Giuseppe Triani
>
> The pin type is used by ERC to check for e.g. outputs connected together
or
> unconnected inputs. I use ERC on every schematic as a final check before
> generating the netlist, but with a much more rigorous check matrix than
the
> default to pick up such things as unintentionally unconnected passive pins
> (e.g. on connectors).
>
> Regards
>
> Andy Gulliver
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
