John
Thanks for your input.
This is a 10GHz circuit and the RF guys have been pretty particular about
the bevels. Now it would be interesting to know if beveling is just another
superstition. If rounded corners will work just as well or better, not
introducing impedance transitions in the line, that would indeed make this
task easier. Could your field solver answer that question?
Henrik
----- Original Message -----
From: John Haddy <[EMAIL PROTECTED]>
To: Protel EDA Forum <[EMAIL PROTECTED]>
Sent: Wednesday, June 13, 2001 8:42 AM
Subject: Re: [PEDA] Microwave PCB layout
> Protel doesn't handle RF layout well. It can't deal with stripline
> design (e.g. defining a piece of stripline in schematic of specific
> length and width doesn't map well to PCB - short of defining a
> library full of segments (which doesn't provide flexibility in layout))
>
> With regard to beveled corners, I was shown a reference not long ago that
> discussed the origin of beveling. It turns out that beveled corners were
> developed as a workaround because arcs couldn't be defined in the CAD
> systems available at the time! Radiussed corners are supposedly better
> than the approximation given by a beveled corner.
>
> I haven't personally used a field solver to confirm this, but some of
> our RF designers were more than happy to allow the use of arcs in
> preference to bevels (which are a right royal pain to do in Protel!).
>
> Cheers,
>
> JohnH
>
> > -----Original Message-----
> > From: Henrik Thurfjell [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, 14 June 2001 1:02 AM
> > To: Protel EDA Forum
> > Subject: [PEDA] Microwave PCB layout
> >
> >
> > Hi all Protel fans
> >
> > How well can Protel handle microwave PCB layouts. You know, as
> > beveled corners of strip lines.
> > The default rounded trace end is a major obstacle in this case.
> > Can that be changed to a square end?
> > Can the mitering of corners be changed to "beveling"?
> >
> > Regards
> > Henrik
> >
> > ============
> > Henrik Thurfjell
> > Megatron Engineering
> > 1149 Susan Way, Sunnyvale CA 94087
> > Direct 408 737 1718
> > FAX & Messages 408 739 2429
> > email: [EMAIL PROTECTED] or [EMAIL PROTECTED]
> >
> >
> >
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> > * To post a message: mailto:[EMAIL PROTECTED]
> > *
> > * To leave this list visit:
> > * http://www.techservinc.com/protelusers/subscrib.html
> > * - or email -
> > * mailto:[EMAIL PROTECTED]?body=ave%20proteledaforum
> > *
> > * Contact the list manager:
> > * mailto:[EMAIL PROTECTED]
> > *
> > * Browse or Search previous postings:
> > * http://www.mail-archive.com/[email protected]
> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
