geeze...
My e-mail gong out sucks :)
I come to see if I helped out, and the answers are already there before my
e-mails even make it to the group hehe.
----------------------------------------------------------------------
Colby Siemer ** Custom Battery Chargers
** Custom Power Supplies
PowerStream Technology ** Custom UPS
140 S. Mountainway Drive ** Custom DC/DC Converters
Orem Utah 84058 ** Power management electronics for OEMs
http://www.PowerStream.com
----- Original Message -----
From: "Michael Reagan" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Friday, June 15, 2001 12:39 PM
Subject: Re: [PEDA] Updating Free Primitives from Component Pads?
> Brad,
>
> After I run connect free primatives:
> I clear all errors, then run the drcs again. sorry I didnt follow up
with
> that.
>
> I dont trust the online drcs to catch everything so I run it again. and
> again
>
>
> Mike
>
> > -----Original Message-----
> > From: Brad Velander [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, June 15, 2001 2:09 PM
> > To: 'Protel EDA Forum'
> > Subject: Re: [PEDA] Updating Free Primitives from Component Pads?
> >
> >
> > Thanks for the ultra-quick response Michael.
> >
> > Well in my case with a limited test, two components (one with the vias
in
> > pad), it did not seem to work. Seeing your response I tried some further
> > testing and found the following.
> >
> > Test 1.
> > a) You're right. However the DRC does not immediately clear although
> > online DRC is ON.
> > b) Tried a couple more operations, routing traces, moving components,
> > etc., DRC was still highlighted.
> > c) Ran DRC manually, violation highlights were removed.
> >
> > Test 2.
> > a) If I unlock & then relock the component primitives, even without any
> > other intermediary action, the DRC highlight is turned off.
> >
> > Seems online DRC does not respond to some operations in real-time.
> > Not a good situation, sure screwed me up for a while and
> > temporarily blew my
> > confidence in understanding what I thought was pretty clear.
> >
> > Brad Velander,
> > Lead PCB Designer,
> > Norsat International Inc.,
> > #300 - 4401 Still Creek Dr.,
> > Burnaby, B.C., V5C 6G9.
> > Tel. (604) 292-9089 direct
> > Fax (604) 292-9010
> > website www.norsat.com
> >
> >
> > > -----Original Message-----
> > > From: Michael Reagan [mailto:[EMAIL PROTECTED]]
> > > Sent: Friday, June 15, 2001 10:54 AM
> > > To: Protel EDA Forum
> > > Subject: Re: [PEDA] Updating Free Primitives from Component Pads?
> > >
> > >
> > >
> > > Negative Brad, connection of copper to free pads works with or without
> > > component primitives locked.
> > >
> > > Mike Reagan
> > > ESDI
> > > Frederick MD
> >
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
