Thanks everyone, I�ve solved the problem..
My apologizes, for my poor explanation, but the problem was that the drill
file was shifted and the drill tools was not recognized by the cam350 v5.0,
so the drill file was show shifted and having all holes to 32 mils. The
shift problem was solved by setting the gerber and drill to absolute origin
and the problem with unrecognized hole apertures of the drill was solved
when i upgrade to the new version of CAM350 v.7.0 that recognizes the drill
table file generated by the protel.
Thanks , again..
---------------------------------------------------------
Fabio Rizental Coutinho
Electrical Engineer
[EMAIL PROTECTED]
+55 41-3616381 (work)
+55 41-2663582 (fax)
---------------------------------------------------------
LACTEC - UTSI
Centro Politecnico da UFPR
CP 19067 - CEP 81531-990
Curitiba - Parana
Brazil - GMT- 03:00
www.lactec.org.br
----------------------------------------------------------
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
