At 10:04 AM 7/3/01 -0300, F�bio Rizental Coutinho wrote:
>i realize that the autorouting just uses the "prefered width" from the
>design rules that i created to every net. but i�d like that the autoroute
>in the first try uses a prefered width.. but if it can�t route some tracks
>because the track width is too large so the autoroute do a second try on
>this tracks using a minimum width .. is this possible?
Another answered with helpful information about how to change the track
width while manually routing. The autorouter uses the preferred width. To
my knowledge -- I don't use the autorouter a lot -- this cannot be changed
with the present autorouter. It is a limited tool, useful within its
capabilities. For a better autorouter, Specctra is suggested -- expensive
-- or, hopefully, we will shortly have a new autorouter, either as a
service pack (which was originally indicated) or as part of the next
release (due fairly soon).
[EMAIL PROTECTED]
Abdulrahman Lomax
P.O. Box 690
El Verano, CA 95433
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
