I am having some troubles with minicom. I know its not as such a programming question but I do not know where else to ask this. I have attached my receiver ublox6T to my computer and is recognized by my device: its recognized at ttyACM0
dmesg | grep tty [140624.449007] cdc_acm 2-1.3:1.0: ttyACM0: USB ACM device My output for stty -F /dev/ttyACM0 is as follows: Here I think there is a proble as why do I get undef for most of my values My settings are as follows for minicom and my terminal <http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/Same_baud_rate_for_minicom_and_terminal.png> Then I do minicom -o -s and I get the following output <http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/axil1.axil1> While I should get an output like this: <http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/minicom.jpg> I just cannot get why I dont get the correct output. I have tried everything but I dont get where is the problem. Maybe I am missing something. Anyone else who had similar problems. -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Basic-Minicom-does-not-show-correct-Output-tp7572953.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS