Hi Micheal Turn Hardware flow control off, why are you running such high baud rates?
I find the receivers very stable and my results are excellent at 38400 baud Regards Anton On Thu, Jul 10, 2014 at 3:21 PM, MichaelFerrero <dav.mercen...@gmail.com> wrote: > I am having some troubles with minicom. I know its not as such a > programming > question but I do not know where else to ask this. I have attached my > receiver ublox6T to my computer and is recognized by my device: its > recognized at ttyACM0 > > dmesg | grep tty > [140624.449007] cdc_acm 2-1.3:1.0: ttyACM0: USB ACM device > > My output for stty -F /dev/ttyACM0 is as follows: Here I think there is a > proble as why do I get undef for most of my values > > My settings are as follows for minicom and my terminal > > < > http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/Same_baud_rate_for_minicom_and_terminal.png > > > > Then I do minicom -o -s and I get the following output > > < > http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/axil1.axil1 > > > > While I should get an output like this: > < > http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/file/n7572953/minicom.jpg > > > > I just cannot get why I dont get the correct output. I have tried > everything > but I dont get where is the problem. Maybe I am missing something. Anyone > else who had similar problems. > > > > -- > View this message in context: > http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Basic-Minicom-does-not-show-correct-Output-tp7572953.html > Sent from the Open Source GPS-related discussion and support mailing list > archive at Nabble.com. > _______________________________________________ > This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. > Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your > subscription > For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS >
_______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS