Hi Jack, Yes, there is different router per subnet and I have done the static routing for that. VIP1 is in the same subnet with Management IP and the Router1 is connected to eth1, so I just simply put Management IP on eth1. Since Router2 is connected to eth2, should I do something on eth2, ex. put another management IP on the eth2 which is in the same subnet with VIP2 ? The other ethernet ports are for Real Server so I have give ve1 for those ports.
There is another weird problem. I have made DNS binding from VIP1 and RE1 and I have put ve1 IP in the same subnet with RE1. RE1 default gateway is ve1 IP. I can query the DNS through VIP1 but RE1 cannot do traceroute to the Internet, stuck on the ServerIron. What's happen here ? Best regards, On Thu, Dec 10, 2009 at 3:41 AM, Jack Stewart <[email protected]> wrote: > Hi Lazuardi, > > Yeah! A question that might be up my alley. I've done this however I need > some more details. > > Do these VIPs need different "static" default gateways on a per subnet > basis? It's possible with the routing code and I can send out the details if > you are interested. > > Otherwise the main trick with subnet A to subnet B traffic is to make sure > that the return traffic goes though the load balancer. The client & server > need to see the Load Balancer as the gateway between subnet A & subnet B. > DSR and source NAT are also options. > > So more details, please. Depending on what you need to do it might help > knock out some of my documentation. > > ---Jack > > > > > Lazuardi Nasution wrote: >> >> Hi, >> >> Is it possible to have multiple VIPs with different Subnets on >> ServerIron 4G or ServerIron ADX1000 ? How can I do that ? I'm using >> router code of firmware. >> >> Best regards, >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
