Hi Chuck,
What software version do you have? I have few MLXes with such module and
there are no problem (3.8c).
You can try check the output of dm save (in enable mode). There should
be some hints about the reason of reboot. dm save is not overwritten
across reloads so you can try dm clear to get latest dump.
Tomek
Chuck Ufarley pisze:
Hey Everybody--
I just got a series of the above cards, and I keep getting SYNC_FID
errors and a looping reboot of the line cards (see below). This has
happened with three in a row, though I *can* get a previously working
card to come up. I tried booting interactive and syncing the mp with
the lp, but the new cards still won't come up. I'd rather not send
them back, for obvious reasons. Am I missing some fix that I should know?
Here's the error:
Module down in slot 1, reason
CARD_DOWN_REASON_FID_DISTRIBUTION_FAILED. Error Co
de (0)
Slot 1 is rebooted
Download to Slot 1 is timed out
And the show module (with the working card up and running):
NetIron MLX-8 Router#sho mod
Module Status Ports Starting MAC
M1 (left):
M2 (right): NI-MLX-MR Management Module Active
F1: NI-X-SF Switch Fabric Module Active
F2: NI-X-SF Switch Fabric Module Active
S1: NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module
CARD_STATE_BOOT 20 0
012.f29e.7b00
S2:
S3: NI-MLX-1Gx20-GC 20-port 10/100/1000 Copper Module
CARD_STATE_UP 20 001
2.f29e.7b60
S4:
S5:
S6:
S7:
S8:
Thanks much. Always appreciated.
--Chuck
------------------------------------------------------------------------
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Tomasz Szewczyk
Poznan Supercomputing and Networking Center
e-mail: [email protected]
tel: +48 61 8582040
fax: +48 61 8525954
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
