Make sure you don't have a copper/RJ45 cable plugged into the same port # where you're plugging the SFP into. Ports 1-4 are "combo" ports, not dedicated. If you use the copper, you can't use the corresponding fiber and vice-versa.
Jared Valentine [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Adam E Barratt (Sales Engineering) Sent: Friday, January 14, 2011 8:43 AM To: [email protected] Subject: [f-nsp] Quick Help Turning Up SFP On FESX424 Good morning, If anyone can shoot me a quick email, I'm onsite trying to turn up some non OEM optics on a FESX424. Is there any config that's needed or should it be automatic? Thanks! Adam -- Adam E Barratt Sales Engineer SOCKET [email protected] 1-800-SOCKET-3 www.socket.net ********************************************************************** Privacy Notice: The information in this message is confidential and may be legally privileged. It is intended for use only by the individual or entity to which it is addressed. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. If you have received this e-mail in error please notify the sender immediately and delete it from your system without copying or forwarding. ********************************************************************** _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
