Dear Foundry users,
I recently picked up an old FWS24 so i could get some hands-on practice
for the BCNE exam, and some home lab experimenting (Cisco-Foundry-HP
interop, etc.).
According to it's datasheet, the FWS24 is capable of L3 switching, but
i'm unable to configure it. Google says it's only possible with 6.5 and
6.6 firmware, and i have 7.0 and 7.1. Is it possible that the L3
features were removed in a newer release?
Flash looks like this:
telnet@kalapacs#sh fl
Code Flash Type: AMD 29F016, Size: 32 * 65536 = 2097152, Unit: 1
Boot Flash Type: AMD 29F010, Size: 8 * 16384 = 131072
Compressed Pri Code size = 870849, Version 07.1.26nT10
Compressed Sec Code size = 864016, Version 07.0.00T10
Boot Image size = 80792, Version 06.00.00
Is it possible to get a support contract on this EOL switch with
Brocade, or something?
Any pointers much appreciated!
Cheers,
Tamas
--
Tamas CSILLAG
systems administrator
A+ Server+ MCSA CCNA
JNCIA JNCIS 3DP APS
DCCA BAIS QFCA ZCNP
[email protected]
+36 30 288 5488
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
