Which binary are you running? If it's running FWS07126.bin, that's only L2-capable.
* N8R07126.bin (Layer 3 Switch code) * NIP07126.bin (IP-only Layer 3 Switch code) Note: Beginning with release 07.1.26, the N8R image supports IP NAT and rate limiting but does not support BGP4. However, the NIP image does still support BGP4. * FWS07126.bin (Layer 2 Switch code) Jonathan Brashear Brocade Resident Consultant, Americas BRCs, Advanced Services [email protected] Office: 214-887-7719 Cell: 214-850-5986 www.brocade.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tamas Csillag Sent: Monday, January 17, 2011 10:44 AM To: [email protected] Subject: [f-nsp] FWS24 layer3 switching Dear Foundry users, I recently picked up an old FWS24 so i could get some hands-on practice for the BCNE exam, and some home lab experimenting (Cisco-Foundry-HP interop, etc.). According to it's datasheet, the FWS24 is capable of L3 switching, but i'm unable to configure it. Google says it's only possible with 6.5 and 6.6 firmware, and i have 7.0 and 7.1. Is it possible that the L3 features were removed in a newer release? Flash looks like this: telnet@kalapacs#sh fl Code Flash Type: AMD 29F016, Size: 32 * 65536 = 2097152, Unit: 1 Boot Flash Type: AMD 29F010, Size: 8 * 16384 = 131072 Compressed Pri Code size = 870849, Version 07.1.26nT10 Compressed Sec Code size = 864016, Version 07.0.00T10 Boot Image size = 80792, Version 06.00.00 Is it possible to get a support contract on this EOL switch with Brocade, or something? Any pointers much appreciated! Cheers, Tamas -- Tamas CSILLAG systems administrator A+ Server+ MCSA CCNA JNCIA JNCIS 3DP APS DCCA BAIS QFCA ZCNP [email protected] +36 30 288 5488 _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
