That might be the issue then indeed. We have the dual-stack setup
working with ports on the vlan config and IP's on the ve config. (per
subnet a seperate vlan on our setup)
On 2/7/11 1:29 PM, Chris Hellkvist wrote:
Hi Jeroen,
2011/2/7 Jeroen Wunnink<[email protected]>:
in global config level do a:
ipv6 unicast-routing
that's already configured, but it seems like it's not possible to mix
ip-subnet-vlans with VE-interfaces that are running v4-addresses and
configuring v6-addreses on the same interface. Mischa's suggestion
works, but i don't want to put different subnets on the same VE
interface. I have some other configs with quite a couple of different
v4-addresses and this would blow up the config for a single VE
interface...
Chris
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[email protected]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
