Interestingly, the current FastIron Edge X line now has 2 separate
options for L3 upgrades. The PREM which supports IPv4 only, and the
PREM6 license which supports IPv4+IPv6. So if you just have a
FESX624-PREM, you'll be limited to IPv4. You'd need the FESX624-PREM6
for full IPv6.
Also, just spoke with a SE at Brocade regarding this issue. The NI-CES
line is meant more as an edge switch and does not currently support IPv6
(they said they would have a sw upgrade in the near future that would
support IPv6). IN the Netiron line CER would be the option you'd require.
Charles
On 2/8/2011 8:48 AM, George B. wrote:
Yeah, if you are doing BGP4+ one should probably be using a CES2024
rather than and FESX*24.
On Tue, Feb 8, 2011 at 8:13 AM, Scott T. Cameron <[email protected]
<mailto:[email protected]>> wrote:
Not entirely true. FESX6x8 doesn't support BGP4+ (V6 peers) yet.
Scott
On Tue, Feb 8, 2011 at 11:06 AM, David <[email protected]
<mailto:[email protected]>> wrote:
The first number after the model letters specifies whether
this is an IPv4 only box, or IPv4/IPv6. So if this was
FESX624-PREM, you'd be fine, but the 424 cannot do IPv6.
David.
On Mon, Feb 7, 2011 at 5:48 PM, Randy McAnally
<[email protected] <mailto:[email protected]>> wrote:
*On Mon, 7 Feb 2011 16:33:21 -0800, David wrote*
> Is this a FESX448/424 or FESX648/624?
It is FESX424-PREM.
~Randy
_______________________________________________
foundry-nsp mailing list
[email protected] <mailto:[email protected]>
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected] <mailto:[email protected]>
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
