Hello, On my side, I used to see BFD flapps when changing ISIS metrics on B2B core interface.
Thank you for the feedback. Best regards. 2014-03-06 9:14 GMT+01:00 Darren O'Connor <[email protected]>: > So far so good on the CER. > > [email protected]#sh bfd neighbors details > Total Entries:1 R:RXRemote(Y:Yes/N:No)H:Hop(S:Single/M:Multi) > NeighborAddress State Interface Holddown > Interval R/H > x.x.x.x UP eth 1/24 900000 300000 Y/S > Registered Protocols(Protocol/VRFID): ospf/0 > Local: Disc: 1, Diag: 0, Demand: 0 Poll: 0 > MinTxInterval: 300000, MinRxInterval: 300000, Multiplier: 3 > Remote: Disc: 24, Diag: 0, Demand: 0 Poll: 0 > MinTxInterval: 300000, MinRxInterval: 300000, Multiplier: 3 > Stats: RX: 769964 TX: 912706 SessionUpCount: 1 at *SysUpTime: > 2:14:7:51.198* > * Session Uptime: 2:14:5:36.63*, LastSessionDownTimestamp: 0:0:0:0.0 > Physical Port:TX: eth 1/24,RX: eth 1/24,Vlan Id: 4001 > * Using PBIF Assist: Y* > > > > [email protected]#sh ver > System: NetIron CER (Serial #: xxxxxxx, Part #: 40-1000617-02) > xxxxxxxx > *IronWare : Version 5.6.0bT183* Copyright (c) 1996-2013 Brocade > Communications Systems, Inc. > Compiled on Jan 19 2014 at 11:47:42 labeled as ce05600b > > > Previously BFD flapped whenever rancid did a config copy. Since the > upgrade a couple of days ago there has not been a single flap. > > > > > Thanks > Darren > http://www.mellowd.co.uk/ccie > > > > ------------------------------ > Subject: Re: [f-nsp] IronWare version on XMR-4000 > From: [email protected] > Date: Wed, 5 Mar 2014 22:39:24 +0100 > CC: [email protected]; [email protected]; > [email protected] > To: [email protected] > > > Hello Darren, > > Looking at 5.6 mainly for the exact same reason : BFD assisted hardware > for CER. > > Is it a game changer ? Did you notice improvements ? > > Thanks. > > BR. > > > > Le 5 mars 2014 à 18:40, "Darren O'Connor" <[email protected]> a écrit : > > You don't need to be on the latest two versions. They are still releasing > updated versions of 5.2 and so on. > > We are running 5.4E on our XMRs and 5.6B on the couple of CERs we have > simply because of BFD hardware for CER in that code version > > Thanks > Darren > http://www.mellowd.co.uk/ccie > > > > > From: [email protected] > > To: [email protected] > > Date: Tue, 4 Mar 2014 15:22:55 +0100 > > CC: [email protected] > > Subject: Re: [f-nsp] IronWare version on XMR-4000 > > > > Hello Stefan, > > > > Maybe you should explain which reasons makes you think you need to > > upgrade ? If you have any specifics reasons, it may help to choose any > > version. > > > > AFAIK, if you have support, you may need to be on the two last versions > > (ie: 5.5 or 5.6), whith the highest level of patchs. Otherwises, in case > > you'd neet to open a ticket, you'd only get "upgrade first, then we'll > > have a look" from the TAC. > > > > I had no real issues on 5.5 versions. On 5.6, a few, but not anything > > really disturbing (see my last post regarding 5.6 on that list). > > > > Regards, > > > > -- > > Clément Cavadore > > > > On Tue, 2014-03-04 at 12:58 +0000, Stefan Larsson wrote: > > > Hi networkers, > > > > > > I was merely wondering if anyone on the list could advice me as to > what IronWare version one is recommended to run these days for production > XMR-4000 routers running BGP? > > > > > > We are currently on 5.3.0T165 but looking to upgrade for several > reasons. > > > > > > Thanks in advance for any and all pointers. > > > > > > - s > > > _______________________________________________ > > > foundry-nsp mailing list > > > [email protected] > > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > > > > _______________________________________________ > > foundry-nsp mailing list > > [email protected] > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > -- Youssef BENGELLOUN-ZAHR
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
