Who wants to test it…. Kindest Regards
James Braunegg P: 1300 769 972 | M: 0488 997 207 | D: (03) 9751 7616 E: [email protected]<mailto:[email protected]> | ABN: 12 109 977 666 W: www.micron21.com/ddos-protection<http://www.micron21.com/ddos-protection> T: @micron21 [Description: Description: Description: Description: M21.jpg] This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer. From: foundry-nsp [mailto:[email protected]] On Behalf Of Youssef Bengelloun-Zahr Sent: Friday, August 01, 2014 5:14 AM To: Skylar MacMinn Cc: [email protected] Subject: Re: [f-nsp] Netiron 5.6 feedbacks Hi all, 560d is out :-) Y. 2014-07-18 15:47 GMT+02:00 Skylar MacMinn <[email protected]<mailto:[email protected]>>: Thanks for that update ☺ We updated to 5.6.0.c and have been fine with sflow since. Thanks again to everyone who helped point out the issue ☺ Cordially Yours, Skylar MacMinn www.crissic.net<http://www.crissic.net> Crissic Solutions, LLC From: foundry-nsp [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Youssef Bengelloun-Zahr Sent: Friday, July 18, 2014 8:43 AM To: Josh Galvez Cc: [email protected]<mailto:[email protected]> Subject: Re: [f-nsp] Netiron 5.6 feedbacks Hi, Little update as 56d GA was postponed until July 31st. Best regards. 2014-06-20 21:29 GMT+02:00 Josh Galvez <[email protected]<mailto:[email protected]>>: Just an FYI, I've ran in to two rather annoying bugs it the 5.6 line of code, this on the XMR. in 5.6b (but fixed in 5.6c): Defect ID: DEFECT000502305 Technical Severity: Medium Probability: High Product: Multi-Service IronWare Technology: Management Reported In Release: NI 05.6.00 Technology Area: SFLOW Closed In Release(s): NI 05.6.00c(Fixed) Symptom: An incorrect raw packet header length in the sFlow protocol is observed. Condition: Issue is seen while running L3 traffic along while enabling sFlow on an interface. sFlow enabled interfaces send sFlow data packets to an sFlow collector. At the collector the raw packet header length is less than what was originally sent. In 5.6c (not in 5.6b, no fix yet): Defect 505978 BGPv6 neighborship not coming up over loopback interfaces as the ipv6 TCP cpnnection is in SYN-SENT state. It will occur if you peer using loopback address with /128 mask. It will be fixed in 5.6d which is not released yet. Current workaround would be to not use /128 mask or to downgrade your code. On Mon, May 26, 2014 at 7:48 AM, James Braunegg <[email protected]<mailto:[email protected]>> wrote: Will be interesting to hear your feedback in a few months !! Was about to upgrade to 5.5 but maybe it’s worth the wait to see how 5.6d is !! Kindest Regards James Braunegg P: 1300 769 972 | M: 0488 997 207 | D: (03) 9751 7616 E: [email protected]<mailto:[email protected]> | ABN: 12 109 977 666<tel:12%20109%20977%20666> W: www.micron21.com/ddos-protection<http://www.micron21.com/ddos-protection> T: @micron21 [Description: Description: Description: Description: M21.jpg] This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer. From: foundry-nsp [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Youssef Bengelloun-Zahr Sent: Monday, May 26, 2014 6:48 PM To: Wouter de Jong Cc: <[email protected]<mailto:[email protected]>> Subject: Re: [f-nsp] Netiron 5.6 feedbacks Hi, I hope this one will be more mature and stable :-) Y. 2014-05-26 10:26 GMT+02:00 Wouter de Jong <[email protected]<mailto:[email protected]>>: Hi Youssef, OK, that is the same date I received :) Regards, Wouter > -----Original Message----- > From: Youssef Bengelloun-Zahr [mailto:[email protected]<mailto:[email protected]>] > Sent: Sunday, May 25, 2014 22:16 > To: Wouter de Jong > Cc: <[email protected]<mailto:[email protected]>> > Subject: Re: [f-nsp] Netiron 5.6 feedbacks > > Hi, > > Answering my own post. Just heard from my SE, 56d GA is targeted for > July 16th. > > Best regards. > > > > > Le 25 mai 2014 à 20:34, Youssef Bengelloun-Zahr > > <[email protected]<mailto:[email protected]>> a écrit > : > > > > Hi, > > > > Interesting... Did TAC give you 56d GA release date ? > > > > Y. > > > > > > > >> Le 25 mai 2014 à 12:57, Wouter de Jong > >> <[email protected]<mailto:[email protected]>> a écrit : > >> > >> Hi, > >> > >> (Apologies for not quoting, etc as I don't have the original email in my > >> mailbox) > >> > >> Too bad that 5.6 seems 'buggy' ... some of it's new features look nice, > and > >> I was planning to put it on a new box... > >> now I'm not so sure about that any longer... > >> > >> > >> Also interesting that you seem to run 5.5d without problems, as we > came > >> across a bug in 5.5 with regards > >> to the IPv6 route cache - DEFECT000500944 > >> > >> Due to it's characteristics, my guess would be that we really can't be > the > >> only one that faced that problem ? :) > >> > >> The issue is that after a link between 2 MLXe's fails and the IGP selects a > >> different path ... it fails to update the IPv6 cache. > >> However, it updates the RIB, etc correctly .... so IPv6 traffic transiting > >> through the router appears to keep working without issue and > >> everything _seems_ correctly (even from looking at CAM), only traffic > >> originated from the router itself (eg. loopback) is still pointing > >> to the wrong interface, which for example affected IPv6 iBGP sessions > in our > >> case. > >> > >> The provided method to resolve it is to manually clear the IPv6 cache > by > >> running "clear ipv6 cache" > >> (Note that 'cache' is hidden in the outout from "clear ipv6 ?" ... > >> DEFECT000503937) > >> > >> > >> According to TAC, this issue occurs in both 5.5.x and 5.6.x ... and both > >> with IS-IS and OSPF. > >> In our case, this was on MLXe-4's with 4x10G X-blades, running IS-IS, with > >> v5.5d and v5.5e > >> Fix should come in 5.6d .. not sure in what version 5.5 will be fixed. > >> > >> > >> Just wondering if anyone else faced this as well ? > >> > >> > >> Best regards, > >> > >> Wouter > >> > >> _______________________________________________ > >> foundry-nsp mailing list > >> [email protected]<mailto:[email protected]> > >> http://puck.nether.net/mailman/listinfo/foundry-nsp -- Youssef BENGELLOUN-ZAHR _______________________________________________ foundry-nsp mailing list [email protected]<mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected]<mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp -- Youssef BENGELLOUN-ZAHR -- Youssef BENGELLOUN-ZAHR
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
