Thanks for all your help John :)
I'm trying to get SANE installed on my FB right now....I'll let you know how
it works.
Thanks,
Marvin
[EMAIL PROTECTED] wrote:
Hi,
port is done.... we just added an article on it
http://www.acmesystems.it/?id=158
let me know if it works for you
John :-)
On 10.01.2007 at , you wrote:
> Hi,
>
> ok, here is an update, i now use the libusb port from capefox and
> stole the make file for sane-backend from openwrt :)
>
> both now compile without errors, i am currently integrating the lot
> into the sdk.... i already have 3 scanners sitting here, i hope that i
> will be able to atleast have 1 of them detected :)
>
> for the 4MB part, i am not sure yet, for me it is not so critical, i
> already have 1 of the new LX832 sitting on my desk :-) however, you
> only need to copy the backend that you want to the fox, which should
> reduce the space needed drastically
>
> i'll keep you updated :-)
> i think cups would be the next 1 after this :-)
>
> --- In [email protected], "themarvman" <[EMAIL PROTECTED]> wrote:
> >
> > Thanks John, please do. Does the original configuration (4mb flash)
> > Fox Board have enough permanent storage to hold SANE? Or would one
> > have to add storage?
> >
> > --- In [email protected], "blogic79" <john@> wrote:
> > >
> > > Hi,
> > >
> > > this is a good one, i started porting sane last night :) libusb is
> > > already in the patch since 2 days ago, i will finish sane tonight
> > > hopefully :) i'll keep you updated
> > >
> > > John
> > > --- In [email protected], "themarvman" <themarvman@> wrote:
> > > >
> > > > Hello,
> > > >
> > > > I'm new to Linux and embedded systems in general, and I'm
> > attempting to
> > > > use a document scanner with the Fox Board. Currently I'm
> > researching a
> > > > solution using an open source project called SANE (Scanner
Access
> > Now
> > > > Easy) which facilitates scanning with Linux, and a SANE
supported
> > > > scanner. For now I'm considering a USB scanner because I'm not
> > sure how
> > > > to go about adding SCSI capability to the Fox Board.
> > > >
> > > > Has anyone tried to implement a similar solution? Is the
solution
> > even
> > > > possible with the Fox Board? Any advice or suggestions would be
> > greatly
> > > > appreciated, thanks!
> > > >
> > >
> >
>
>
>
>
---------------------------------
Expecting? Get great news right away with email Auto-Check.
Try the Yahoo! Mail Beta.
[Non-text portions of this message have been removed]
