Once it is working, tell me which scanner you used
Quoting Marvin Cox <[EMAIL PROTECTED]>: > Thanks for all your help John :) > > I'm trying to get SANE installed on my FB right now....I'll let > you know how it works. > > Thanks, > > Marvin > > [EMAIL PROTECTED] wrote: > Hi, > > port is done.... we just added an article on it > http://www.acmesystems.it/?id=158 > > let me know if it works for you > > John :-) > > On 10.01.2007 at , you wrote: >> Hi, >> >> ok, here is an update, i now use the libusb port from capefox and >> stole the make file for sane-backend from openwrt :) >> >> both now compile without errors, i am currently integrating the lot >> into the sdk.... i already have 3 scanners sitting here, i hope that i >> will be able to atleast have 1 of them detected :) >> >> for the 4MB part, i am not sure yet, for me it is not so critical, i >> already have 1 of the new LX832 sitting on my desk :-) however, you >> only need to copy the backend that you want to the fox, which should >> reduce the space needed drastically >> >> i'll keep you updated :-) >> i think cups would be the next 1 after this :-) >> >> --- In [email protected], "themarvman" <[EMAIL PROTECTED]> wrote: >> > >> > Thanks John, please do. Does the original configuration (4mb flash) >> > Fox Board have enough permanent storage to hold SANE? Or would one >> > have to add storage? >> > >> > --- In [email protected], "blogic79" <john@> wrote: >> > > >> > > Hi, >> > > >> > > this is a good one, i started porting sane last night :) libusb is >> > > already in the patch since 2 days ago, i will finish sane tonight >> > > hopefully :) i'll keep you updated >> > > >> > > John >> > > --- In [email protected], "themarvman" <themarvman@> wrote: >> > > > >> > > > Hello, >> > > > >> > > > I'm new to Linux and embedded systems in general, and I'm >> > attempting to >> > > > use a document scanner with the Fox Board. Currently I'm >> > researching a >> > > > solution using an open source project called SANE (Scanner > Access >> > Now >> > > > Easy) which facilitates scanning with Linux, and a SANE > supported >> > > > scanner. For now I'm considering a USB scanner because I'm not >> > sure how >> > > > to go about adding SCSI capability to the Fox Board. >> > > > >> > > > Has anyone tried to implement a similar solution? Is the > solution >> > even >> > > > possible with the Fox Board? Any advice or suggestions would be >> > greatly >> > > > appreciated, thanks! >> > > > >> > > >> > >> >> >> >> > > > > > > > --------------------------------- > Expecting? Get great news right away with email Auto-Check. > Try the Yahoo! Mail Beta. > > [Non-text portions of this message have been removed] > >
