Hi, I just wondering if there are any updates on mmc driver for SDK 2_20? We can consider to invest reasonable amount of money for the time involved into porting mmc driver to sdk 2.20. Of course if Acme does not want to handle it themselves.
I have 10 boards (GPS-KIT) waiting for this update. And we are stalling to buy more. I understand Acme does not do this kind of support and just does hardware part. But without mmc driver these boards is no use for us. Yes we use old sdk right now with old mmc driver, but we want to update to 2.6.26 and get rid of all dmesg traces. Regards, Andrey > mmc : Card Initialised > mmc : The inserted card has a capacity of 1023672320 Bytes > mmc : adding disk > scheduling while atomic: S10mountall/0x00000100/611 > > Stack from c07bdc98: > 00000002 c07bdd78 c07bc000 c01604ec c02d8000 c01ab7f8 c01ab7fc c049c940 > c02d802e 00000002 c07bdd78 c07bc000 00000000 00000004 c07bdcf4 c000a688 > c01ab7f8 c07bdd18 c01609be c07bdd78 c01abacc c07bdd2c 00000000 c067f840 > Call Trace: [<c01604ec>] [<c000a688>] [<c01609be>] [<c000a644>] [<c000a644>] > [<c0019f74>] [<c0019e6e>] > [<c00a76d2>] [<c000d492>] [<c00637fe>] [<c00a3ce2>] [<c00a3c8c>] > [<c00faf70>] [<c000d492>] [<c00fb034>] > [<d07bde70>] [<c0005241>] [<c00fb04a>] [<c0014c4c>] [<c001157a>] > [<c0011602>] [<c000630c>] [<c00312fe>] > [<c0031384>] [<c00313de>] [<c00055f4>] [<c0039416>] [<c000986a>] > [<c0005cbe>] <6> mmc:<3>scheduling while atomic: S10mountall/0x00000100/611 > > Stack from c07bdb2c: > c07bdbd0 c07bdbcc c01ebbfc c01604ec c0024358 00000000 c02b2078 00000002 > 00000001 c07bdbd0 c07bdbcc c01ebbfc c07bdbd0 c07bdbcc c045dbc0 c00fadb4 > c00a11ac c07bdb7c c0161006 c07bdbcc c02d76a0 c0024386 c0161338 00000000 > Call Trace: [<c01604ec>] [<c0024358>] [<c00fadb4>] [<c00a11ac>] [<c0161006>] > [<c0024386>] [<c0161338>] > [<c003ff88>] [<c0024a70>] [<c001db3e>] [<c001db3e>] [<c0025cb0>] > [<c003ff88>] [<c0063922>] [<c0063c6a>] > [<c0063522>] [<c00638ac>] [<c0040616>] [<c00aa294>] [<c00408e0>] > [<c000d492>] [<dcba0000>] [<c0063830>] > [<c00a3ce2>] [<c00a3c8c>] [<c00faf70>] [<c000d492>] [<c00fb034>] > [<d07bde70>] [<c0005241>] [<c00fb04a>] > [<c0014c4c>] [<c001157a>] [<c0011602>] [<c000630c>] [<c00312fe>] > [<c0031384>] [<c00313de>] [<c00055f4>] > [<c0039416>] [<c000986a>] [<c0005cbe>] mmc1 > scheduling while atomic: S10mountall/0x00000100/611 > eth0: changed MAC to 00:40:8C:00:00:4F > serdriver tried setting invalid baud rate, flags 8b0. > Badness in local_bh_enable at kernel/softirq.c:140 > > Stack from c02e9f70: > c01a2440 c045a0c0 c18a63c0 c001163a c00c21c8 c1c43d80 c047a4c0 c00c4d0e > 00000000 c1c43dee c001182c 00000000 0000000a c01f04f8 00000001 c001157a > c02e8000 c02e8000 c01a0024 c0011602 c01a2440 c00119b6 c000a726 c02e1fb0 > Call Trace: [<c001163a>] [<c00c21c8>] [<c00c4d0e>] [<c001182c>] [<c001157a>] > [<c0011602>] [<c00119b6>] > [<c000a726>] [<c001d6a0>] [<c001d774>] [<c0006a14>] Badness in > local_bh_enable at kernel/softirq.c:140 > > Stack from c02e9f7c: > c01a2440 c1c43d80 c047a4c0 c001163a c00c4d0e 00000000 c1c43dee c001182c > 00000000 0000000a c01f04f8 00000001 c001157a c02e8000 c02e8000 c01a0024 > c0011602 c01a2440 c00119b6 c000a726 c02e1fb0 c001d6a0 c001d774 00000000 > Call Trace: [<c001163a>] [<c00c4d0e>] [<c001182c>] [<c001157a>] [<c0011602>] > [<c00119b6>] [<c000a726>] > [<c001d6a0>] [<c001d774>] [<c0006a14>] > [EMAIL PROTECTED] /]2261# Sunday, October 26, 2008, 2:21:08 AM, you wrote: > > > > > > hi > > i made the original driver > > are you talking about AXIS SDK 2_20 ? > > i will have time during the next week and will try to get a driver up > and running. > > i'll post it here when ready > > John > > Quoting [EMAIL PROTECTED]: > >> Hello, >> >> Is there any MMC driver for 2.6.19 or 2.6.26 kernel exist? >> Driver included in the default acme SDK does not built in newer axis SDK. >> >> Can't update boards to newer kernel because of this. Any help >> appreciated. >> >> >> Best regards, >> Andrey >> >> >> > > -- > John Crispin > hacking, coding, etc > blogic on irc > > _______ ________ __ > | |.-----.-----.-----.| | | |.----.| |_ > | - || _ | -__| || | | || _|| _| > |_______|| __|_____|__|__||________||__| |____| > |__| W I R E L E S S F R E E D O M > KAMIKAZE (bleeding edge) ----------------------- > * 10 oz Vodka Shake well with ice and strain > * 10 oz Triple sec mixture into 10 shot glasses. > * 10 oz lime juice Salute! > --------------------------------------------------- > > > > Messages in this topic (2) Reply (via web post) | Start a new > topic > > Messages | Files | Photos > > > >
