Yes,
there is a update, i am currently not based at home, so i had no
access to a foxboard. However i ordered a gpskit and a foxboard and
they arrived yesterday morning. I currently have only gprs so i cannot
download the SDK, but i will be near a solder iron and a dsl line
tomorrow mornig, so by monday i will actually have the hw and sdk, so
i can get it working
currently, 2 bugs have been reported.
* scheduling while atomic - simple bug, it'll be a matter of minutes
when i have the board running
* oops on remove card before unmount - i am not sure if this is an
actual bug, i had only one report. if i can reproduce it i will fix
that too
is there a usb driver in the sdk ? otherwise i will talk to hinko, to
get it his patches merged.
any other problems ?
John
Quoting [EMAIL PROTECTED]:
> Hi,
>
> I just wondering if there are any updates on mmc driver for SDK 2_20?
> We can consider to invest reasonable amount of money for the time
> involved into porting mmc driver to sdk 2.20. Of course if Acme does
> not want to handle it themselves.
>
> I have 10 boards (GPS-KIT) waiting for this update. And we are
> stalling to buy
> more.
>
> I understand Acme does not do this kind of support and just does
> hardware part. But without mmc driver these boards is no use for us.
> Yes we use old sdk right now with old mmc driver, but we want to update to
> 2.6.26 and get rid of all dmesg traces.
>
>
> Regards,
> Andrey
>
>
>
>
>> mmc : Card Initialised
>> mmc : The inserted card has a capacity of 1023672320 Bytes
>> mmc : adding disk
>> scheduling while atomic: S10mountall/0x00000100/611
>>
>> Stack from c07bdc98:
>> 00000002 c07bdd78 c07bc000 c01604ec c02d8000 c01ab7f8
>> c01ab7fc c049c940
>> c02d802e 00000002 c07bdd78 c07bc000 00000000 00000004
>> c07bdcf4 c000a688
>> c01ab7f8 c07bdd18 c01609be c07bdd78 c01abacc c07bdd2c
>> 00000000 c067f840
>> Call Trace: [<c01604ec>] [<c000a688>] [<c01609be>] [<c000a644>]
>> [<c000a644>] [<c0019f74>] [<c0019e6e>]
>> [<c00a76d2>] [<c000d492>] [<c00637fe>] [<c00a3ce2>]
>> [<c00a3c8c>] [<c00faf70>] [<c000d492>] [<c00fb034>]
>> [<d07bde70>] [<c0005241>] [<c00fb04a>] [<c0014c4c>]
>> [<c001157a>] [<c0011602>] [<c000630c>] [<c00312fe>]
>> [<c0031384>] [<c00313de>] [<c00055f4>] [<c0039416>]
>> [<c000986a>] [<c0005cbe>] <6> mmc:<3>scheduling while atomic:
>> S10mountall/0x00000100/611
>>
>> Stack from c07bdb2c:
>> c07bdbd0 c07bdbcc c01ebbfc c01604ec c0024358 00000000
>> c02b2078 00000002
>> 00000001 c07bdbd0 c07bdbcc c01ebbfc c07bdbd0 c07bdbcc
>> c045dbc0 c00fadb4
>> c00a11ac c07bdb7c c0161006 c07bdbcc c02d76a0 c0024386
>> c0161338 00000000
>> Call Trace: [<c01604ec>] [<c0024358>] [<c00fadb4>] [<c00a11ac>]
>> [<c0161006>] [<c0024386>] [<c0161338>]
>> [<c003ff88>] [<c0024a70>] [<c001db3e>] [<c001db3e>]
>> [<c0025cb0>] [<c003ff88>] [<c0063922>] [<c0063c6a>]
>> [<c0063522>] [<c00638ac>] [<c0040616>] [<c00aa294>]
>> [<c00408e0>] [<c000d492>] [<dcba0000>] [<c0063830>]
>> [<c00a3ce2>] [<c00a3c8c>] [<c00faf70>] [<c000d492>]
>> [<c00fb034>] [<d07bde70>] [<c0005241>] [<c00fb04a>]
>> [<c0014c4c>] [<c001157a>] [<c0011602>] [<c000630c>]
>> [<c00312fe>] [<c0031384>] [<c00313de>] [<c00055f4>]
>> [<c0039416>] [<c000986a>] [<c0005cbe>] mmc1
>> scheduling while atomic: S10mountall/0x00000100/611
>> eth0: changed MAC to 00:40:8C:00:00:4F
>> serdriver tried setting invalid baud rate, flags 8b0.
>> Badness in local_bh_enable at kernel/softirq.c:140
>>
>> Stack from c02e9f70:
>> c01a2440 c045a0c0 c18a63c0 c001163a c00c21c8 c1c43d80
>> c047a4c0 c00c4d0e
>> 00000000 c1c43dee c001182c 00000000 0000000a c01f04f8
>> 00000001 c001157a
>> c02e8000 c02e8000 c01a0024 c0011602 c01a2440 c00119b6
>> c000a726 c02e1fb0
>> Call Trace: [<c001163a>] [<c00c21c8>] [<c00c4d0e>] [<c001182c>]
>> [<c001157a>] [<c0011602>] [<c00119b6>]
>> [<c000a726>] [<c001d6a0>] [<c001d774>] [<c0006a14>] Badness
>> in local_bh_enable at kernel/softirq.c:140
>>
>> Stack from c02e9f7c:
>> c01a2440 c1c43d80 c047a4c0 c001163a c00c4d0e 00000000
>> c1c43dee c001182c
>> 00000000 0000000a c01f04f8 00000001 c001157a c02e8000
>> c02e8000 c01a0024
>> c0011602 c01a2440 c00119b6 c000a726 c02e1fb0 c001d6a0
>> c001d774 00000000
>> Call Trace: [<c001163a>] [<c00c4d0e>] [<c001182c>] [<c001157a>]
>> [<c0011602>] [<c00119b6>] [<c000a726>]
>> [<c001d6a0>] [<c001d774>] [<c0006a14>]
>> [EMAIL PROTECTED] /]2261#
>
>
>
>
> Sunday, October 26, 2008, 2:21:08 AM, you wrote:
>
>>
>>
>>
>>
>>
>> hi
>>
>> i made the original driver
>>
>> are you talking about AXIS SDK 2_20 ?
>>
>> i will have time during the next week and will try to get a driver up
>> and running.
>>
>> i'll post it here when ready
>>
>> John
>>
>> Quoting [EMAIL PROTECTED]:
>>
> >> Hello,
> >>
> >> Is there any MMC driver for 2.6.19 or 2.6.26 kernel exist?
> >> Driver included in the default acme SDK does not built in newer axis SDK.
> >>
> >> Can't update boards to newer kernel because of this. Any help
> >> appreciated.
> >>
> >>
> >> Best regards,
> >> Andrey
> >>
> >>
> >>
>>
>> --
>> John Crispin
>> hacking, coding, etc
>> blogic on irc
>>
>> _______ ________ __
>> | |.-----.-----.-----.| | | |.----.| |_
>> | - || _ | -__| || | | || _|| _|
>> |_______|| __|_____|__|__||________||__| |____|
>> |__| W I R E L E S S F R E E D O M
>> KAMIKAZE (bleeding edge) -----------------------
>> * 10 oz Vodka Shake well with ice and strain
>> * 10 oz Triple sec mixture into 10 shot glasses.
>> * 10 oz lime juice Salute!
>> ---------------------------------------------------
>>
>>
>>
>> Messages in this topic (2) Reply (via web post) |
>> Start a new topic
>>
>> Messages | Files | Photos
>>
>>
>>
>>
>
>
>
--
John Crispin
hacking, coding, etc
blogic on irc
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge) -----------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
