Hi,
>Please provide suggestions/recommendations for improvements in
FoxCAE.
well, here are some:
* Loop drawing dynamicly updated from I/A System (most important, Prio
1!)
* Need ability to form groups of blocks to function modules, which can
be used anywhere in the project
* Full support for ladder logic (including editor)
* Ability to generate a block default from a downloaded block
* Ability to generate a typical from a downloaded loop, which has been
built using ICC (of course, propagation has to be done manually). Criteria:
common LOOPID
This is the output of a little brainstorming we performed here on customer
site. ;-)))
best regards -
Marcel Sieling
Systems Technologies
FOXBORO Deutschland GmbH
Heerdter Lohweg 53 - 55
40549 Duesseldorf
Tel.: +49 (0)211 5966-171
Fax: +49 (0)211 5966-104
Mobile: +49 (0)172 2673077
E-Mail: [EMAIL PROTECTED]
http://www.foxboro-deutschland.de
Private Home: http://www.powerslider.de
> -----Ursprüngliche Nachricht-----
> Von: Golemme, Stephen [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Dienstag, 21. August 2001 16:12
> An: Foxboro DCS Mail List
> Betreff: FoxCAE Enhancements
>
> Please provide suggestions/recommendations for improvements in FoxCAE.
>
> -----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro Company. All
> postings from this list are the work of list subscribers and no warranty
> is made or implied as to the accuracy of any information disseminated
> through this medium. By subscribing to this list you agree to hold the
> list sponsor(s) blameless for any and all mishaps which might occur due to
>
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
>
> -----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro Company. All
> postings from this list are the work of list subscribers and no warranty
> is made or implied as to the accuracy of any information disseminated
> through this medium. By subscribing to this list you agree to hold the
> list sponsor(s) blameless for any and all mishaps which might occur due to
>
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
