On this CP I have no overruns and 80%
idle time.
Your answer was pretty much what I thought
just needed confirmation.
Thanks Much!
-----Original Message-----
From: Johnson, Alex [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 01, 2001 2:50 PM
To: Foxboro DCS Mail List
Subject: RE: Block Scan Time
The general answer is no.
Block scans can be missed. The skipping of a BPC is an overrun and can be
tracked by the System block in the Cp
If you enable the system block, you can monitor the occurrence of overruns
on your CP and decide if it is stable enough for your application.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
-----Original Message-----
From: Burnham, Rob C. [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, February 01, 2001 2:32 PM
To: 'Foxboro List'
Subject: Block Scan Time
Can a blocks scan time be used
to accurately count? I am trying to
to count elapsed seconds of overflow
on a tank, the scan time for the block
is 1 second and I increment a memory
register by one on each scan.
Is this accurate?
Rob Burnham
P. H. Glatfelter Co.
920 727-2426
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company.
All
postings from this list are the work of list subscribers and no
warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree to hold
the
list sponsor(s) blameless for any and all mishaps which might occur
due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
