Hi Christo,
Στις 26/5/2019 11:10 π.μ., ο Christo Crause έγραψε:
On Sun, May 26, 2019 at 9:16 AM Dimitrios Chr. Ioannidis via fpc-devel
<fpc-devel@lists.freepascal.org
<mailto:fpc-devel@lists.freepascal.org>> wrote:
"G:\Programming\dimitris\tools\gcc-arm-none-eabi\bin\arm-none-eabi-objcopy.exe:
G:\Programming\dimitris\tools\mbf\Samples\Blinky\Blinky.hex 64-bit
address 0x4b4fa300000000 out of range for Intel Hex
file"http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
I suspect the problem is with objcopy, not FPC. This bug report
(https://sourceware.org/bugzilla/show_bug.cgi?id=24065) mention a
problem if the target is 64 bit and the host is 32 bit. Check if you
can get a recent version of objcopy, or try the 64 bit version of the
arm binutils (I assume you have a 64 bit Windows machine)
Great find !
In this bug report there is a link for a patched toolchain . I'll try it
later today to see how it goes.
PS: I don't see any commits reg. AVR's. Do you have any insight if some
of the AVR bug reports ( stack error checking, DIV, etc ) will be fixed
/ resolved ?
regards.
--
Dimitrios Chr. Ioannidis
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
