Just one note of caution:
When you encounter strange behaviour of your Code on Cortex-M0 in
respect to DIV commmand then check the mailinglist, Jeppe has provided a
fix but I am not quite sure if the fix has made it into official trunk.
Michael
Am 26.05.19 um 09:15 schrieb Dimitrios Chr. Ioannidis via fpc-devel:
Hi,
yesterday I tried ( for first time ) to use the fpc for arm with the
gcc-arm-none-eabi-8-2018-q4-major-win32 toolchain and I got this error :
"G:\Programming\dimitris\tools\gcc-arm-none-eabi\bin\arm-none-eabi-objcopy.exe:
G:\Programming\dimitris\tools\mbf\Samples\Blinky\Blinky.hex 64-bit
address 0x4b4fa300000000 out of range for Intel Hex file"
As I'm not familiar with ARM, does anyone have a clue or a hint on
what I'm doing wrong ?
FYI,
FPC trunk builded with :
">make.exe clean crossall crossinstall OS_TARGET=embedded
CPU_TARGET=arm SUBARCH=armv6m CROSSOPT="-O1"
INSTALL_PREFIX=G:\Programming\dimitris\tools\fpc-trunk
CROSSBINDIR=G:\Programming\dimitris\tools\gcc-arm-none-eabi\bin
BINUTILSPREFIX=arm-none-eabi-"
and the
project options are :
"G:\Programming\dimitris\tools\fpc-trunk\bin\x86_64-win64\fpc.exe
-Tembedded
-Parm
-MObjFPC
-Scgi
-Ch8192
-Cs8192
-O1
-gw2
-l
-vewnhibq
-Fi..\..\Source
-Filib\arm-embedded
-Fu..\..\Source
-Fu.
-FUlib\arm-embedded
-FE.
-oBlinky
-Cparmv6m
-XParm-none-eabi-
-Wparduinozero"
PS: I used the "Microcontroller Board Framework" (
https://github.com/michael-ring/mbf ) from Michael Ring cause the
official FPC doesn't have my MCU ( ATSAMD21G18A ).
regards,
--
Dimitrios Chr. Ioannidis
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
