I've had a quick read of http://j-software.dk/stm32f103.php , for the fpc
part i kinda get what to do ,
i want to be able to debug code on the fly as in when its running on my
board using the STLINK V2... so i assume i would have to setup lazarus gdb
to do this , is this correct ? if so how.
-----Original Message-----
From: Rainer Stratmann
Sent: Saturday, March 16, 2013 7:15 PM
To: FPC-Pascal users discussions
Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
May be you can use STM32F...
That works for me with FPC.
http://j-software.dk/stm32f103.php
Am Saturday 16 March 2013 03:13:52 schrieb Justin Smyth:
I'm using a LPC 1343 Microcontroller unit from waveshare, basically its a
Cortex M3.
the link for the board is -
http://www.wvshare.com/product/Open1343-Package-A.htm
I've now got STLInk V2 debugging kit , i want to debug this board in
lazarus
KInd Regards
Justin
-----Original Message-----
From: Rainer Stratmann
Sent: Saturday, March 16, 2013 6:28 AM
To: FPC-Pascal users discussions
Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
What kind of controller?
Atmel AVR 8 bit?
ARM 32 bit?
For AVR it works good.
Am Friday 15 March 2013 13:29:48 schrieb Justin Smyth:
> I've tried to use mikropascal and not had any luck , i emailed them my
> board i was going to use with the product and they said they didnt
> support it.
may be in the future...
> I've now got a ST Link V2 for the debugging , if someone could give me
> an
> idea how to set it up , i would be great full.
>
> Kind Regards
>
>
> Justin Smyth
>
> -----Original Message-----
> From: Rainer Stratmann
> Sent: Friday, March 15, 2013 9:30 PM
> To: FPC-Pascal users discussions
> Subject: Re: [fpc-pascal] [OT] Pascal compiler for embedded platforms
>
> Am Friday 15 March 2013 10:40:15 schrieb Roberto P.:
> > 2013/3/15 Rainer Stratmann <rainerstratm...@t-online.de>
> >
> > > For 32 bit ARM I would try to use freepascal.
> > > I got it work somehow.
> >
> > any tip or guide would be appreciated, then.
>
> For me that is not easy. Most of the time I get it work somehow and
> shortly
> after I did not realize why ... :-)
> I have suggestions to make something easier, but I am always facing
> excuses
> why it is good as it is, so I less take part of this type of discussions
> which are exhausting for me.
>
> > > > I'm just a little afraid of the potentially limited maturity of
> > > > these.
> > >
> > > What do you mean exactly with that?
> >
> > I mean that (maybe) both FPC and mikroePascal are young products for
> > the embedded world, so that I might be facing compiler or library
> > propblems during the devlopment, besides my own project problems.
>
> May be mikroe is not providing the sourcecode (I am not sure), but they
> have for nearly everything a solution. Ethernet, FAT, SPI, SD-Card, USB,
> HTTP, TCP, etc...
> There were problems in the past, but because they are (heavily) busy
> with
> that
> stuff they solve most of the important problems. And I think they are
> honest.
> _______________________________________________
> fpc-pascal maillist - fpc-pascal@lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
>
>
> _______________________________________________
> fpc-pascal maillist - fpc-pascal@lists.freepascal.org
> http://lists.freepascal.org/mailman/listinfo/fpc-pascal
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
