With freeze I meant, freeze. Rock solid. Nothing to be done. Stepping
through the code the laptop freezes in the second putb in pcic_disable.
As in stepping the assembler to that outb does never return the prompt.
Nick
> >From some very brief testing here, the problem is that the card's
> interrupt handler hasn't yet been disconected. When you power the card
> down, you get an edge on the interrupt pin, and then the driver interrupt
> handler spins madly because the card hardware is gone and thus doesn't
> behave. If you have an ethernet card, try suspending with just it in the
> slot and then break into DDB; I'll warrant that you end up inside the
> relevant driver's interrupt handler.
>
> If I'm correct, this is just an ordering issue; the driver has to be shut
> down _before_ the slot, not afterwards.
>
> > The system freezes on powering down a PCCARD slot. From memory the
> > location is putb1 called from pcic_disable. The freeze is easy to
> > reproduce, just remove the card. When stepping through the code, even
> > the debugger prompt does not return after the outb for PCIC_POWER on
> > line 698 of pcic.c.
> >
> > This is on CURRENT as of yesterday evening, but other CURRENTs of the
> > last month have the same problem. I've not been able to find a possible
> > culprit in recent commits to pcic.c or pccard.c.
> >
> > Do you have any hint on how to debug this or what version of pcic.c I
> > should take to get rid of this problem?
> >
> > pcic-pci0: <TI PCI-1131 PCI-CardBus Bridge> irq 9 at device 19.0 on pci0
> > pcic-pci1: <TI PCI-1131 PCI-CardBus Bridge> irq 9 at device 19.1 on pci0
> > ...
> > pcic: polling, can't alloc 0
> > pcic: polling, can't alloc 0
> > pcic0: <VLSI 82C146> on isa0
> > pccard0: <PC Card bus -- kludge version> on pcic0
> > pccard1: <PC Card bus -- kludge version> on pcic0
> >
> > Thanks for the work being done.
> >
> > Nick
> > --
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED] USB project
> > http://www.etla.net/~n_hibma/
> >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of the message
> >
>
> --
> \\ Give a man a fish, and you feed him for a day. \\ Mike Smith
> \\ Tell him he should learn how to fish himself, \\ [EMAIL PROTECTED]
> \\ and he'll hate you for a lifetime. \\ [EMAIL PROTECTED]
>
>
--
[EMAIL PROTECTED]
[EMAIL PROTECTED] USB project
http://www.etla.net/~n_hibma/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
