Okay, now I'm getting somewhere, but where I don't know :( set the
ifconfig, run IPXrouted, and netstat -nr tells me a bunch of stuff about
IPX ... great, that appeasr to be up, but I get errors with ncplogin, so
obviously I'm missing something (and wihtout the search of archives, this
is the most embarressing and painful way of doing this *sigh*) ...
athena# netstat -nr
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 131.162.136.1 UGSc xl0
127.0.0.1 127.0.0.1 UH lo0
131.162.136/21 link#1 UC xl0 =>
131.162.136.1 8:0:2:17:32:c5 UHLW xl0 1200
131.162.136.69 0:a0:24:b2:26:e2 UHLW xl0 1197
131.162.138.223 0:0:c0:eb:c4:bf UHLW xl0 1042
192.168.254 link#3 UC vmnet1 =>
192.168.254.2 0:50:56:d3:51:e4 UHLW vmnet1 942
IPX:
Destination Gateway Flags Netif Expire
1.* 83a28800.c08a9aeb UG xl0
8126d01.* 83a28800.800021732c5 UG xl0
b53ccf9.* 83a28800.800021732c5 UG xl0
82428072.* 83a28800.800021732c5 UG xl0
83a2003c.* 83a28800.800021732c5 UG xl0
83a200ca.* 83a28800.508b7148d9 UG xl0
83a200cc.* 83a28800.2200c110aa45 UG xl0
83a20332.* 83a28800.2200c110aa9d UG xl0
83a20333.* 83a28800.800021732c5 UG xl0
83a20832.* 83a28800.2200c1108a0a UG xl0
83a28000.* 83a28800.800021732c5 UG xl0
83a28800.* 83a28800.104b696333 U xl0
83a29000.* 83a28800.800021732c5 UG xl0
83a29800.* 83a28800.800021732c5 UG xl0
83a2a000.* 83a28800.800021732c5 UG xl0
83a2a800.* 83a28800.800021732c5 UG xl0
83a2c800.* 83a28800.800021732c5 UG xl0
83a2c841.* 83a28800.800021732c5 UG xl0
83a2f000.* 83a28800.800021732c5 UG xl0
athena# ncplogin -S admin.acadiau.ca -U marc
Warning: no cfg files found.
ncplogin: can't find server ADMIN.ACADIAU.CA: syserr = No route to host
athena# ncplogin -A admin.acadiau.ca
ncplogin: no default connection found: syserr = Bad file descriptor
athena#
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 131.162.138.193 netmask 0xfffff800 broadcast 131.162.143.255
ipx 83a28800.104b696333
ether 00:10:4b:69:63:33
media: autoselect (10baseT/UTP) status: active
I got the "ETHERNET_II ipx network number" from our Novell Network Admin
...
IPX is enabled in the kernel ... else I imagine that IPXrouted wouldn't
have worked ...
How does one 'set a route to host' in IPX? :(
Thanks...
On Wed, 16 Feb 2000, Dan Nelson wrote:
> In the last episode (Feb 16), The Hermit Hacker said:
> > Can someone point me to a document that talks about setting this up?
> > I remember seeing something pass by about 'ifconfig'ng a device for
> > ipx and whatnot, but that was awhile ago ...
>
> in rc.conf:
>
> ifconfig_fxp0_ipx="ipx 0x87654321"
> ifconfig_lo0_ipx="ipx 0x12345678.1"
> ipxrouted_enable="YES"
>
> 87654321 is whatever your existing ETHERNET_II ipx network number is.
>
> 12345678 is your machines local network number; probably not needed
> except for machines running mars_new.
>
> That should be all you need.
>
> --
> Dan Nelson
> [EMAIL PROTECTED]
>
Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy
Systems Administrator @ hub.org
primary: [EMAIL PROTECTED] secondary: scrappy@{freebsd|postgresql}.org
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message