Hi,
next try.
Please forgive if gets too stupid :-)
# cat x
drive d1 device /dev/da1d
drive d2 device /dev/da2d
volume raid
plex org stripe 256k
sd length 50m drive d1
sd length 50m drive d2
(please note again the misspelling of striped)
# vinum create x
1: drive d1 device /dev/da1d
** 1 Can't initialize drive d1: Device not configured
2: drive d2 device /dev/da2d
** 2 Can't initialize drive d2: Device not configured
4: plex org stripe 256k
** 4 Invalid plex organization: Invalid argument
5: sd length 50m drive d1
** 5 Unnamed sd is not associated with a plex: Invalid argument
6: sd length 50m drive d2
** 6 Unnamed sd is not associated with a plex: Invalid argument
Configuration summary
Drives: 0 (4 configured)
Volumes: 1 (4 configured)
Plexes: 0 (8 configured)
Subdisks: 0 (16 configured)
V raid State: down Plexes: 0 Size: 0 B
(juppie no panic!)
(Ok, after repairing 'striped' in x)
# vinum create x
Configuration summary
Drives: 0 (4 configured)
Volumes: 2 (4 configured)
Plexes: 1 (8 configured)
Subdisks: 2 (16 configured)
V raid State: down Plexes: 1 Size: 100 MB
P raid.p0 S State: down Subdisks: 2 Size: 100 MB
S raid.p0.s0 State: stale PO: 0 B Size: 50 MB
S raid.p0.s1 State: stale PO: 256 kB Size: 50 MB
(Hmm, stale sigh. The vinum(8) GOTCHAS 2. is not explicit about my situation.
this time, no `vinum resetconfig`, so:)
# vinum detach raid.p0
# vinum detach raid.p0.s0
# vinum detach raid.p0.s1
(Maybe this was too stupid and I get a deserved:)
..panic..
IdlePTD 3686400
initial pcb at 2f747c
panicstr: integer divide fault
panic messages:
---
Fatal trap 18: integer divide fault while in kernel mode
instruction pointer = 0x8:0xc0283b27
stack pointer = 0x10:0xc377cc64
frame pointer = 0x10:0xc377ccd8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 330 (vinum)
interrupt mask =
trap number = 18
panic: integer divide fault
syncing disks... 3 3 done
running gdb post mortem:
#0 boot (howto=256) at ../../kern/kern_shutdown.c:287
#1 0xc016e6f5 in panic (fmt=0xc02c9ea9 "integer divide fault")
at ../../kern/kern_shutdown.c:448
#2 0xc025a8ce in trap_fatal (frame=0xc377cc28, eva=0)
at ../../i386/i386/trap.c:943
#3 0xc025a32c in trap (frame={tf_es = 16, tf_ds = 16, tf_edi = 0,
tf_esi = 102400, tf_ebp = -1015558952, tf_isp = -1015559088, tf_ebx = 0,
tf_edx = 0, tf_ecx = 102400, tf_eax = 1, tf_trapno = 18, tf_err = 0,
tf_eip = -1071105241, tf_cs = 8, tf_eflags = 66118, tf_esp = 0,
tf_ss = -1065135960}) at ../../i386/i386/trap.c:586
#4 0xc0283b27 in __qdivrem (uq=102400, vq=0, arq=0xc377ccf4)
at ../../libkern/qdivrem.c:100
#5 0xc028496f in __umoddi3 (a=102400, b=0) at ../../libkern/umoddi3.c:51
#6 0xc0842fe6 in ?? ()
#7 0xc0848dc4 in ?? ()
#8 0xc0848528 in ?? ()
#9 0xc01a0567 in spec_ioctl (ap=0xc377ce0c)
at ../../miscfs/specfs/spec_vnops.c:440
#10 0xc019fe79 in spec_vnoperate (ap=0xc377ce0c)
at ../../miscfs/specfs/spec_vnops.c:129
#11 0xc02309a9 in ufs_vnoperatespec (ap=0xc377ce0c)
at ../../ufs/ufs/ufs_vnops.c:2327
#12 0xc019aae5 in vn_ioctl (fp=0xc0811040, com=3223602776,
data=0xc377ced0 "\001", p=0xc352b780) at vnode_if.h:395
#13 0xc017a114 in ioctl (p=0xc352b780, uap=0xc377cf84)
at ../../kern/sys_generic.c:564
#14 0xc025ab17 in syscall (frame={tf_es = 47, tf_ds = 47,
tf_edi = -1077945576, tf_esi = 1, tf_ebp = -1077945696,
tf_isp = -1015558188, tf_ebx = -1077945732, tf_edx = 0,
tf_ecx = 134781696, tf_eax = 54, tf_trapno = 12, tf_err = 2,
tf_eip = 134619728, tf_cs = 31, tf_eflags = 663, tf_esp = -1077945760,
tf_ss = 47}) at ../../i386/i386/trap.c:1101
#15 0xc024f20c in Xint0x80_syscall ()
#16 0x80483d1 in ?? ()
#17 0x8048295 in ?? ()
#18 0x80480ec in ?? ()
Anything else I can do or inspect?
Bye!
----
Michael Reifenberger
Plaut Software GmbH, R/3 Basis
To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message
