According to Peter Wemm: > As a special warning: The APIC_IO interrupt management could be a little > wonky on systems that require the special mptable fixups. If you have > warnings about broken mptables, or additional interrupts being wired, > hold back until it's been checked.
Seems to work fine on my 2x PPro/200, Intel Providence MB, 64 MB, SMP. I've built but not yet tested the new fxp.ko module though. Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #15: Sat Apr 17 12:33:10 CEST 1999 robe...@tara:/src/src/sys/compile/TARA_SMP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping=9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> real memory = 67108864 (65536K bytes) avail memory = 62119936 (60664K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000 cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000 io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0307000. Preloaded elf module "nfs.ko" at 0xc030709c. Preloaded elf module "linux.ko" at 0xc0307138. Preloaded elf module "green_saver.ko" at 0xc03071d8. Preloaded elf module "procfs.ko" at 0xc030727c. Pentium Pro MTRR support enabled, default memory type is uncacheable npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <PCI host bus adapter> on motherboard pci0: <PCI bus> on pcib0 chip0: <Intel 82440FX (Natoma) PCI and memory controller> at device 0.0 on pci0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 6.0 on pci0 fxp0: interrupting at irq 18 fxp0: Ethernet address 00:a0:c9:49:5a:ef isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 uhci0: <Intel 82371SB (PIIX3) USB Host Controller> at device 7.2 on pci0 uhci0: interrupting at irq 10 usb0: <Intel 82371SB (PIIX3) USB Host Controller> on uhci0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ahc0: <Adaptec aic7880 Ultra SCSI adapter> at device 9.0 on pci0 ahc0: interrupting at irq 17 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs fdc0: interrupting at irq 6 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> at fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0 atkbd0: <AT Keyboard> on atkbdc0 atkbd0: interrupting at irq 1 psm0: <PS/2 Mouse> on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 psm0: interrupting at irq 12 vga0: <Generic ISA VGA> on isa0 sc0: <System console> on isa0 sc0: VGA color <10 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: interrupting at irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at irq 3 ppc0 at port 0x378 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppc0: interrupting at irq 7 APIC_IO: routing 8254 via 8259 on pin 0 Waiting 2 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at ahc0 bus 0 target 6 lun 0 da0: <QUANTUM VIKING II 4.5WLS 4110> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C) -- Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- robe...@keltia.freenix.fr FreeBSD keltia.freenix.fr 4.0-CURRENT #2: Fri Apr 16 22:37:03 CEST 1999 To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message